- Kirjeldus
Kirjeldus
- 5 Diverse Models
- KM series are designed to provide exceptionally clear, articulate sound with excellent off-axis rejection for high gain before feedback in a live environment. The range consists of a variety of condenser and dynamic microphones. Combined the series as a whole works exeptionally well for drum kits, however each microphone performs as an individual also working as vocal and instrument mics in their own right.
- The KMD-7 pack consists of two KM3’s, a KM4 and four KM5’s to provide a one stop drum microphone solution suitable for live and home studio use.
- combination of Condensers & Dynamic Mics
- high tech zinc finish
- 5 diverse models
- unidirectional polar responses
- neodymium magnets (Except KM-3)
- dent-resistant steel grilles
- single and multipacks available
- rugged cast Zinc alloy body
- on/off switch
- gold-plated XLR connectors
- KM-3
- transducer Type: Condenser
- polar Pattern: Cardioid
- frequency Response: 30 Hz – 20 kHz
- load Impedance: <1000 Ohms
- sensitivity (@ 1000Hz): -46 dBV/Pa
- off Axis Rejection: >18dB
- maximum SPL: >120dB
- s/n ratio: more than 70dB
- current consumption: 4.6mA
- power Supply: 11-52V phantom power
- connector: 3 pin gold plated male XLR
- polarity: Positive voltage on pin 2 relative to pin 3 of output connector
- housing: Zinc Alloy
- dimensions: ?˜30mm x 154mm x ?˜21mm
- weight: 120g (4.2oz)
- KM-4
- transducer Type: Dynamic
- polar Pattern: Super-cardioid
- frequency Response: 30Hz – 12kHz
- load Impedance: 250 Ohms
- sensitivity (@ 1000Hz): -54 dBV/Pa
- off Axis Rejection: >20dB
- maximum SPL: >135dB
- connector: 3 pin gold plated male XLR
- polarity: Positive voltage on pin 2 relative to pin 3 of output connector
- housing: Zinc Alloy
- dimensions: ?˜58.6mm x77.8mm x ?˜27mm
- weight: 240g
- KM-5
- transducer Type: Dynamic
- polar Pattern: Super-cardioid
- frequency Response: 50Hz – 16kHz
- load Impedance: 250 Ohms
- sensitivity (@ 1000Hz): -54 dBV/Pa
- off Axis Rejection: >22dB
- maximum SPL: >130dB
- connector: 3 pin gold plated male XLR
- polarity: Positive voltage on pin 2 relative to pin 3 of output connector
- housing: Zinc Alloy
- dimensions: ?˜45.2mm x 61.3mm x ?˜24mm
- weight: 170g